EEC1502 Series

The EcoWater EEC 1502 is our line of two-tank, economy water softeners.

Category:

Features

  • Patented Electronic Digital Demand Module – Solid-state electronics record usage patterns and control regeneration frequency
    based on predicted needs.
  • Time Keeper – Permanent program memory with capacitor-backed time retention. Maintains time for at least 6 hours in case of power loss.
  • Multi-Wrap Fiberglass Reinforced Resin Tank – Durable fiberglass-wrapped tank liner, doesn’t deteriorate, rust or corrode.
  • Self-Cleaning Distributors – Distributors exhibit excellent flow rates and are cleaned automatically by countercurrent water pressure.
  • Positive-Action Brine Valve – Snap-together construction eliminates use of solvents that may contaminate water.  Positive action helps prevent overfilling.
  • Automatic Bypass During Regeneration Means Continuous Water Usage
  • Energy Efficient Power Supply – Simplifies installation, maintenance and reduces electrical hazards.
  • Hardness Reduction, and Low Lead Content – This softener has been tested and certified by NSF International against NSF/ANSI Standard 44 for hardness reduction and efficiency and NSF/ANSI 372 for low lead content.
  • Optional Conditioner Shroud Kit – The EEC 1502 series conditioners are available with or without an optional shroud kit to cover the resin tank and controller assembly for appearance or weather protection.  The image shows the product with the shroud kit option.

Dimensions

EEC1502
R25
EEC1502
R40
Nominal Resin
Tank Size
8″ Dia. x 40″ 9″ Dia. x 40″
A 45 1/2″ 47″
B 41 3/8″ 41 3/4″
C 3 3/8″ 3 3/4″
D 8 1/4″ Dia. 9 1/4″ Dia.

EEC 1502

Specifications

EEC1502R25 EEC1502R40
Efficiency (gr./lb. @ min. lb. salt dose) 5,000 @ 2.1 5,100 @ 2.3
Hardness Capacity (gr. @ max. lb. salt dose) 26,600 @ 11.2 39,000 @ 14.7
Service Flow Rate (gpm @ psi) 6 @ 10.4 9.9 @ 14.0
Intermittent Flow Rate (gpm @ psi) 7.5 @ 15 10.2 @ 15
Amount of High Capacity Resin (lbs.) 36 56
Maximum Water Hardness (grains per gallon) 70 110
Maximum Clear Water Iron (ppm-Fe) 4 5
Approximate Water Used Each Regeneration (gal.) 32 38
Salt Storage Capacity (lbs.) 200 200
Supply Water Pressure Limits (psi) 20-125 20-125
Supply Water Temperature Limits (°F / °C) 40-120 / 4-49 40-120 / 4-49
Ambient Temperature Range (°F / °C) 35-150 / 2-66 35-150 / 2-66
Plumbing Connection Provided (inches) 1 1

Electrical Requirement, 120V, 50/60Hz (28V DC, 350 mA, power supply included)

1 Intermittent flow rate does not represent the maximum service flow rate used for determining the conditioner’s rated capacity and efficiency. Continuous operation at flow rates greater than the certified flow rate may affect capacity and efficiency performance. The validity of these flow rates is verified by NSF.
2 Increased amounts of clear water iron can reduce conditioners efficiency. Refer to owner’s manual for details. Wisconsin requires additional treatment if water supply contains greater than 5 ppm clear water iron.
3 When operated at 35 psi water pressure.
4 Maximum pressure for Canadian use is 1.4 – 7.0 Kg/cm2

More Info.

Spec Sheet